 |
TYPICAL HOIST DIMENSIONS AND WEIGHTS |
HOISTS FOR SINGLE GIRDER TOP AND UNDER RUNNING CRANES |
The following charts represent typical dimensions and weights for wire rope hoists to be used with the single girder, top and under running crane drawings and dimensions in the crane specification section of our site. These charts allow the specifier to properly select and dimension the type of crane to fit the application.
The "B" and "C" dimensions are actual hoist dimensions. When using with a single girder, top running crane, add 12" to these dimensions to allow for the crane end truck and trolley stops. These dimensions can also change based on interference from runway electrification or obstructions attached to the crane runway.
We have selected typical wire rope hoists from our main suppliers to fit most CMAA Class C applications. If you have a special requirement that may not appear on these charts or crane drawings, please contact our factory for assistance as there are many hoists not shown and modifications to the crane bridge that may be incorporated to fit your specific needs. |
|
Shaw-Box wire rope hoists by
Lift-tech International |
Capacity |
Lift in ft. |
H Dim. |
B Dim. |
C Dim. |
Weight |
| 1 ton |
25 |
22-11/16" |
12" |
17" |
266# |
| 1 ton |
50 |
22-11/16" |
12" |
17" |
385# |
| 2 ton |
20 |
24-7/16" |
12 |
11-1/8" |
385# |
| 2 ton |
40 |
24-7/16" |
12" |
17" |
410# |
| 2 ton |
52 |
37-7/8" |
26-1/8" |
30-1/4" |
980# |
| 3 ton |
30 |
27-3/16" |
12-1/2" |
22-3/8" |
535# |
| 3 ton |
44 |
38" |
25-5/8" |
30-1/4" |
1005# |
| 5 ton |
20 |
29-1/16" |
12-1/2" |
22-3/8" |
545# |
| 5 ton |
30 |
31" |
12-1/4" |
36" |
850# |
| 5 ton |
47 |
38" |
22-5/8" |
49-3/8" |
1635# |
| 7.5 ton |
12 |
37-1/2" |
22-1/8" |
24-3/4" |
975# |
| 7.5 ton |
22 |
38" |
25-5/8" |
30-1/4" |
1100# |
| 7.5 ton |
38 |
38" |
21-1/4" |
49-3/8" |
1690# |
| 10 ton |
15 |
39-1/8" |
24-3/8" |
30-3/4" |
1660# |
| 10 ton |
25 |
41-7/8" |
19-7/8" |
51-1/4" |
1785# |
| 10 ton |
40 |
41-7/8" |
19-7/8" |
71-7/8" |
2085# |
|
|
