Uesco Industries, Inc. :: Manufacturers

Home Crane Specifications Hoists Accessories Service Parts Resource Center Inspections Inquiries Contact Us

Uesco Industries, Inc. :: Manufacturers :: Uesco Industries, Inc.

Uesco Cranes provides Custom Engineered Cranes, Design Services, Fabrication, Installation, Preventative Maintenance Programs, 24 hour Emergency Parts and 24 hour Repair Service.Service class

All cranes are rated for a minimum CMAA Class C service.

Controls - All standard cranes feature electronic soft-start for a cushioned acceleration and adjustable torque magnetic disc brakes for smooth stopping of the load. Controls are full magnetic including a manual fused through the door disconnect with lockout handle, mainline magnetic disconnect, a 110 vac control circuit, thermal overload relays and branch circuit fusing all housed in a Nema 12 control enclosure. Equipment is designed to operate on 230 or 460 volt, 3 phase, 60 hertz.

End trucks - Crane end trucks are fabricated from structural steel channels or plates welded into a rigid frame. Top running wheels are forged steel hardened to 325 Bhn minimum. Drive wheels are tapered tread. Underrunning wheels are forged steel and have a crowned or flat tread for operation on standard S beam, wide flange beam or patented track. Rubber bumpers and rail sweeps are standard on all cranes. Drive machinery - All Uesco dual-motor crane drives are double or triple reduction parallel shaft, helical/spur reducers splash lubricated for dependable service and longer life. Minimum B-10 bearing life is 5,000 hours. The bridge drive motors are flange mounted with a standard Nema C or D flange and are 30 minute rated with Class F insulation. Thermal detectors imbedded in the motor windings provide overload protection and meet the latest publication of the National Electric Code.

Bridge girders are fabricated from structural shapes, reinforced as necessary to build a rigid lifting frame. All double girder cranes have a minimum deflection of L/888, single girder cranes L/600. All cranes have a minimum safety factor of 5:1. Included are (3) 100 amp sliding shoe collectors and a 4 motion pendant suspended from the control panel for emergency on/off and bridge travel forward/reverse. When ordered with a wire rope or electric chain hoist, the pushbuttons of the hoist and crane are combined into one control station either hoist suspended or suspended from an optional flat cable festoon system. Standard bridge electrification is flat cable suspended in loops from a steel track.

Result pages:

Uesco Industries, Inc.